Collins Cooling & Heating Co
Highly Reviewed - Family Owned Cleveland Area Heating & Cooling Contractor For Over 20 Years!
+
=
we are only a phone call away
(216) 453-1050
CALL US NOW
​for a price estimation
Cotractor License # 46146 www.collinscooling.com
Install New Complete Rheem High Efficient Furnace and Air Conditioning System
(For homes with existing furnace and air conditioning system of equal type and design)
WE PROPOSE TO PROVIDE INSTALL & SERVICE THE FOLLOWING:
Equipment Components:
Install (1) Rheem 115,000 BTU 80% Efficient Gas Furnace with Factory Insulated Cabinet (Model R801P)
Install (1) Rheem High efficiency 4 ton, 13 SEER, R-410A Condenser unit (Model R13A)
Install (1) Matching Cased ADP Evaporator Coil With Expansion Valve
Install (1) Digital Programmable Thermostat (Model Pro1 T805)
Duct System:
Install new 26-gage sheet metal plenum transition for supply and return air duct system
Seal all metal to metal joints with approved sealant
Insulate all exposed sheet metal with 1.5” insulation (Required in unconditioned areas only)
Check all accessible ducting connection and do minor sealing if needed
Additional Work:
1) Install a new AGA-approved lever handle cut-off valve and ridged black iron gas line between new furnace and existing gas
piping
2) Install new condensate drain line connection from evaporator coil to existing 3/4" drain. (1) primary & (1) safety back-up
pan if required
3) Connect furnace venting to existing chimney liner or approved flue.
4) Flush existing refrigeration lines
5) Install required electric circuits with disconnect switch to furnace and a weatherproof conduit connectors at the condenser
unit
6) Install all required pads and platforms to support new equipment
7) Recover existing refrgerant for EPA recycling
8) All work to be performed in a neat and professional manner sweeping, dusting and vacuuming will be accomplished at
conclusion at each day of work (approximately 2 day) and all debris and old eqipment will be removed from the
premises
9) Start-up system and cycle to verify proper operation according to manufactures specifications
10) All required labor for the above mentioned job is included in price
WE PROPOSE HEREBY TO FURNISH MATERIAL AND LABOR FOR A TOTAL OF :
Rheem Complete System $7,495.00
(Website Promo Limited time offer $1000 off Rheem Complete System. New Total $6,495.00)
There is no contractual obligation when a customer obtains this free proposed estimate. Our normal procedure is to give a proposed estimate and then, if you agree that we are within a price limit you are comfortable with, we will (at your request) make an actual site visit to physically inspect your home, refine the estimate if needed and write a proposal for the work to be done. This proposed estimate does not constitute a guarantee or a binding offer, and is only good for ten (10) days from the date you printed